Disposer - Operating a Batch Feed Model

The Batch Feed garbage disposal is safe and easy to operate. It will not operate until the cap is inserted, which is an added safety feature. It is activated by inserting the cap into the opening to the hopper and twisting or aligning the cap and pushing down firmly. Check the Owner's Manual for your model for specific use instructions.

Operating a Batch Feed Garbage Disposer

Load food waste into the hopper until it is full, but do not pack down. Turn the cold water on and insert the cap. Twist the stopper cap or push down, depending on the model, and let it run until the food waste has been flushed away, then remove the stopper.

How to load and operate a batch feed disposal.

1. Remove the switch top sink drain stopper.
2. Scrape food waste into the disposer through the sink drain but DO NOT pack too tightly.
3. Turn on cold water to a full flow.
4. Replace the twist-top sink drain stopper and turn the handle clockwise to start the disposer.
5. When the grinding sound stops, turn the twist-top handle counter-clockwise to stop the disposer.
6. Wait 30 seconds and then turn off the cold water.

Additional Appliance Inquiries

Whatever the need, we are here to help. Considering the repair or replacement of an appliance? Please reach out to us for expert support at any time!