Advantium 120 - Demo Mode

The 120 Volt Advantium Oven has a demo mode that can be used by dealers to display the features of the appliance. This article explains how to put the oven into demo mode and turn off demo mode.

 

Using the Demo Mode Feature on a 120 Volt Advantium Oven

Over-the-Range

  1. Unplug oven for at least 3 minutes.
  2. Plug the oven in.
  3. Before setting the clock, touch and hold the “POWER LEVEL” and “START” pads at the same time for a full 3 seconds.
  4. To end demo mode, touch and hold the “POWER LEVEL” and “START” pads at the same time for a full 3 seconds.

The demo mode will not be terminated by simply unplugging the appliance, regardless of how long it is powered down. You must follow the instructions above to initiate or terminate the demo mode.

 

Built-in

  1. Turn off the circuit breaker for the oven for at least 3 minutes.
  2. Turn the breaker back on.
  3. Before setting the clock, touch and hold the “POWER/TEMP” and “START” pads at the same time for a full 3 seconds.
  4. To end demo mode, touch and hold the “POWER/TEMP” and “START” pads at the same time for a full 3 seconds.

The demo mode will not be terminated by simply unplugging the appliance, regardless of how long it is powered down. You must follow the instructions above to initiate or terminate the demo mode.

 

Additional Appliance Inquiries

Whatever the need, we are here to fulfill it. Please reach out to us for support with every appliance. From a repair to a replacement, we are able to guide you through every decision.