Refrigerator - Keurig® Brewing System Dispensing Hot Water

On Café Series refrigerators with the Keurig® K-Cup Brewing System, you can dispense hot water into a mug or container using the Hot Water feature, or you can dispense through the K-Cup brewer into your mug. Cold water is dispensed from a tube under the middle of the control panel. However, the nozzle for the hot water is separate and is located under the control panel on the right side of the dispenser. When dispensing hot water only, remove the brewer.

 

Profile™ Series refrigerators with the Keurig® K-Cup Brewing System do not have the Hot Water feature. Hot water can only be dispensed with the brewer in place by holding down the Brew Dispense button for 3 seconds. Do not dispense hot water through the brewer without a K-Cup installed or leaking could occur.

 

Dispensing Hot Water Directly Into a Container

  1. Press the Hot Water button and select your desired water temperature on the display: 90, 150, 170, 185, or Custom (90-185).

  2. When hot water is ready, you will hear a beep, the screen will indicate "Hot Water Ready" and the Hot Water knob will flash red.

  3. To dispense hot water, rotate the Hot Water knob counter-clockwise and push it in to dispense. As a child safety feature, you must turn the knob and hold it in while dispensing. Be careful to not place your hand under the hot water stream.

To see how the dispenser works, check out the following video.

 

 

Note: Video may not appear if Advertising cookies are blocked. Re-enable Advertising Cookies to view videos.

 

Dispensing Hot Water Through the K-Cup Pod Brewer

  1. Press the Hot Water button and select Keurig K-Cup Pod from the Hot Water Selection Menu, and then choose the size, 6 ounces, 8 ounces, or 10 ounces. You can also slide the brewer into the rails under the right side of the dispenser, which will automatically take you to the Keurig K-Cup Pod size selection screen.

  2. When hot water is ready, you will hear a beep, the screen will indicate "Hot Water Ready" and the Hot Water knob will glow red.

  3. Rotate the hot water knob counter-clockwise and push in to start dispensing. As a child safety feature, you must turn the knob and push it in to dispense.

    • Because you pre-selected the size, you do not need to continue pushing in the knob once hot water starts to dispense through the brewer.

    • Be careful to not place your hand under the hot water stream.

To see how the Keurig® K-Cup Brewing System works, check out the following video.

 

 

Note: Video may not appear if Advertising cookies are blocked. Re-enable Advertising Cookies to view videos.

 

For specific information about the Hot Water feature on your refrigerator, consult the Owner's Manual for the specific model you own.

 

Additional Appliance Inquiries

Whatever the need, we are here to help. Considering the repair or replacement of an appliance? Please reach out to us for expert support at any time!